With the advancement in the technology and automobile industry, the use of the latest motorcycle batteries is a must for modern bikes. However, if you are a motorbike rider, then you should know in detail about motorcycle batteries. When you are planning to replace your old motorcycle battery or buy a new one, there are multiple things you come across like battery type, its specifications, performance, life, duration, capacity, etc. that enables you to choose the most suitable battery for your motorbike. Furthermore, being knowledgeable about your motorcycle batteries also helps you to check the battery frequently and take proper maintenance. Thus, for all the motorbike riders out there, here is the article for you that explains the top 10 things about motorcycle batteries.

  • Alike motorcycle tires, the series of numbers called model numbers are associated with each battery type. However, you might be unknown about what these model numbers mean. So, let’s look into them. The model number of the motorcycle battery is determined by the Pulse Current (PC) and Pulse-Hot-Cranking-Amp (PHCA). Furthermore, in order to turn the engine over, this happens to be the first three to five seconds of high rate discharge.
  • If you step into the market to buy a new motorcycle battery for your motorbike, then you should be aware of the types of batteries and the battery that is best suitable for your requirement. However, there are two types of Valve Regulated Lead Acid (VRLA) Batteries, they are: Gel cell batteries and Absorbed Glass Mat (AGM) batteries. Among these, AGM batteries are considered as the latest battery technology and are used in motorcycles with gas engines. Other older types are referred to as conventional AGM batteries.
  • If we kept aside the point called initial purchase price, AGM batteries are considered to be the best motorcycle batteries in terms of service life in normal use.
  • In addition, you might have heard the word CCA but unaware of what it actually means. Then, here you get to know. CCA (Cold Cranking Amps) is used to measure the performance of the battery. Furthermore, CCA is the current a battery can deliver for 30 seconds at 0°F. The higher the Cold Cranking Amps (CCA), the better the performance of the battery at the start-up.
  • The batteries that are designed for electric bikes are available in different chemical composition that can be mostly found in mobile phones. These are expensive compared to the batteries designed for automotive applications. Thus, it is suggested not to use batteries made for electric vehicles as they would be totally unreliable for motorbikes with gas engines.
  • You might have heard that a quick charge for a battery is better than the slow charge. A quick charge improves the performance of the battery from deep discharge and enables the battery to spend maximum time fully charged. However, most of the battery technologies do not benefit from fast charging and can reduce the life of a battery. So, it is suggested to go through the user guide of your battery before using quick charge.
  • If you are using one of the older models battery with wet cell technology for your motorbike, then before placing it in storage for the winter, it is always advisable to fully charge your motorcycle battery.
  • If you want to experience a longer life and high reliability of your motorcycle battery, then it is necessary to incorporate proper maintenance and storage practices. Furthermore, all types of motorcycle batteries should be stored in the dry and properly heated room. In addition, you can check the user manual for detailed information about storing your motorcycle batteries like appropriate temperature, etc.
  • When you are handling your motorcycle battery, it is suggested for you to wear safety glasses and gloves. If it is an old model battery, then try to avoid contact between your body and the battery as any acid spillage can damage your clothes and skin. However, if replacing your motorcycle battery is quite new to you, then go through the quick guide provided below.
  • Safely disconnect all the cables from the battery. Then, you can return the battery to its place of purchase for proper recycling.
  • If any components of the battery or cables are damaged due to acid and corrosion, then replace them.
  • Set the new replacement motorcycle battery in the holder and secure it in place.
  • Now, connect the positive cable to the positive terminal of the battery and the negative cable to the negative terminal.
  • Tighten the bolt, nut or screw to its appropriate battery specifications.
  • If you have an old model battery i.e. conventional AGM or flooded wet-cell battery and if it is not sealed, then the motorcycle battery has a tendency to spill acid and cause corrosion at the positive terminal and its surrounding area. So, it is always advisable to replace your battery with the sealed and non-spillage design motorcycle battery.

Furthermore, with this article, you might have received valuable information about the motorcycle batteries. In addition to this, you can visit our blog to know detailed information about different types of motorcycle batteries and buy the best suitable one for your requirement.